Driver Left Four Door Master Power Window Lift Switch Assembly OEM Numbers 56009449AC 56009449AB 68171681AA 68171681AB Compatible With Jeep Cherokee XJ 1997-2001 Window Control Spare Parts

Product Appearance Description

This dual-function combined switch (rearview mirror adjustment + four-door master window control) is exclusively designed for 1997-2001 Jeep Cherokee XJ off-road vehicle. It adopts long matte black integrated ABS injection molding. A circular 4-way rearview mirror rotary knob is arranged on front left, four independent vertical window lift buttons with clear up/down arrow marks are set behind the knob. Thickened integral elastic snap buckles around shell fit heavy off-road door trim tightly and will not loose during bumpy driving. A dedicated multi-pin wiring socket with anti-reverse positioning posts is equipped on rear side, thickened anti-oxidation copper pins inside resist poor contact caused by muddy and humid off-road environment. Fully sealed dustproof and waterproof internal circuit board isolates corrosion from mud, water and dust. It is 1:1 OEM molded, interchangeable with 4 original OEM part numbers directly, no trimming of door panel plastic parts required during installation and removal.

Product Function Description

It fits 12V off-road vehicle electrical system of Jeep Cherokee XJ, centralized driver-side control for rearview mirror and full-car windows, core functions as follows:
4-way rotary knob: independent multi-angle up/down/left/right viewing adjustment for left & right exterior rearview mirrors;
Four independent lift buttons: separate up/down movement control for four vehicle doors’ windows, freely adjust opening height of single window;
Built-in voltage stabilizing shielding anti-interference circuit, smooth window signal without stuck or electromagnetic noise under bumpy off-road and unstable voltage conditions;
Dual over-current & short-circuit protection chips on circuit board cut off power automatically under wading or circuit overload short circuit to protect original vehicle BCM;
Fully compatible with factory vehicle circuit protocol, works normally after direct harness plug-in, no ECU coding at repair shop needed.
It is a direct interchangeable replacement for faulty original switch assembly with stuck rotary knob, unresponsive window buttons, failed mirror adjustment and mud-oxidized aged pins, compatible with 4 OEM factory part numbers cross replacement.

Applicable Models

Brand	Vehicle Model	Production Year Range
Jeep	Cherokee XJ	1997 – 2001

Parameter

English Item	English Spec Details
Product Model	LD-20002
Full Product Name	Driver Side Four-Door Master Power Window Lift Control Switch Assembly For Jeep Cherokee XJ
OEM Interchange Part Numbers	56009449AC / 56009449AB / 68171681AA / 68171681AB
Operating Voltage	DC 12V Standard Automotive Voltage
Main Raw Materials	Matte black high-toughness ABS long integrated housing, wear-resistant silent lift buttons with arrow marks, anti-oxidation copper conductive pins, fully sealed dustproof waterproof circuit module
Installation Method	OE Direct Plug & Play, Match Original Left Door Panel Mount Slot, No Wiring Cutting Or ECU Programming Required
Waterproof & Dustproof Grade	IP54 Dustproof & Splash Resistant (Suitable For Off-Road Vehicle Mud & Dust Environment)
Factory Warranty	12 Months Factory Quality Warranty
Compatible Vehicle & Production Years	Jeep Cherokee XJ (1997–2001)
Appearance Features	1. Long strip matte black ABS housing with front combined control area: rearview mirror adjustment knob + four window lift buttons2. Circular 4-way mirror adjustment rotary knob on left front; four vertical independent window up/down buttons on rear section3. Surround integrated elastic snap buckles for tight fixation on off-road vehicle door trim4. Rear multi-pin dedicated wiring socket with fixed anti-reverse positioning posts5. 1:1 OEM mold replication, fully interchangeable with all listed OEM part numbers
Core Integrated Functions	1. 4-way rotary knob: adjust left & right exterior rearview mirror up/down/left/right viewing angle2. Four independent window buttons: separate up/down control for front left, front right, rear left, rear right vehicle windows3. Built-in anti-interference voltage stabilization chip, stable signal without jitter during window lifting4. Over-current & short-circuit dual protection chip to prevent vehicle BCM burnout under off-road unstable voltage5. Full matching original vehicle electrical circuit protocol, plug-and-play without coding

Product Details

Packaging and delivery

Item	Value
Selling Units	Single item
Single package size
Single gross weight

Product Specifications and Trade Terms

Item	Specification/Details
Warranty Period	12 months or 100,000 km (whichever comes first)
Payment Terms	T/T, PayPal, Western Union
Port of Loading	Ningbo Port or Shanghai Port
Lead Time	7-15 working days after deposit
Packing	50 pcs per carton with foam
Shipping Method	By sea / air / express (DHL/FedEx/UPS)
Sample Policy	Free samples, buyer pays freight
After-Sales Support	Itemcement for defective items
Certification	ISO/TS 16949:2009

Supplementary Note

1.Model Distinction: LD-20002 is interchangeable with OEM numbers 56009449AC / 56009449AB / 68171681AA / 68171681AB, only fits 1997-2001 Jeep Cherokee XJ. Not interchangeable with switches for Jeep Grand Cherokee, Wrangler, Cherokee KL, nor Ford / Tesla / Hyundai / Kia window switches;

2.Pre-shipment QC: Every finished product passes 5 complete factory inspections for off-road harsh environment: 100,000 times button pressing durability test, 50,000 times rotary knob durability test, mud water spray waterproof test, high-low temperature cycle aging test, wire harness circuit matching test;

3.Supply Advantage: Factory permanent stock available all year round, support small sample trial orders and full-container bulk export wholesale, suitable for Amazon, independent website and overseas offline off-road auto parts distributors;

4.Installation Tips: Pry open front left door armrest trim panel with plastic pry tool, unplug old switch rear wiring connector, clip this product into door panel slot in alignment, plug back original harness and reinstall trim panel to finish non-destructive installation.