...

Car Dashboard A/C Heater Climate Control Module OEM Numbers 55055459AA 55055459AB 55055459AF 55055459AC 55055459AD 55055459AE 223292 314-399-5945 Compatible With Jeep Vehicle HVAC Control Spare Parts

Product Appearance Description

 

LD-27007 is a narrow-size climate control panel exclusive for Jeep Cherokee XJ and Wrangler TJ, narrow strip matte black integrated ABS injection molded. The panel is equipped with 3 small rotary knobs: left for blower air volume adjustment, middle with red & blue arc scale for cooling/heating temperature control, right for switching multiple air outlet modes including windshield defrost, face air and foot air. Integral elastic plastic buckles on both sides of housing require no screws, clip directly into original center dashboard reserved slots without damaging interior during disassembly & installation. A multi-pin wiring plug with built-in anti-reverse lock clip is equipped on rear side, internal silver-plated conductive copper springs resist oxidation and avoid stuck contact failure after tens of thousands of rotation adjustments. Fully sealed dustproof circuit board resists heavy dust from off-road conditions and high dashboard temperature in summer. It is 1:1 OEM molded, compatible with 8 groups of OEM replacement part numbers, can be directly installed on matching-year Jeep vehicles, incompatible with Chrysler LD-27006 climate control panel.

Product Function Description

 

It fits 12V vehicle HVAC electronic control system for 1997-2006 Jeep Cherokee / Wrangler, integrates integrated control of fan speed, temperature, air outlet mode and compressor, core functions as follows:
1.Multi-speed blower air volume adjustment to meet different ventilation demands during off-road travel;
2.Stepless cold/hot air adjustment via red-blue scale, freely switch cooling and heating mode;
3.Multi-mode air outlet switching, including windshield defog & defrost function;
4.Independent A/C compressor on-off control;
5.Vehicle voltage stabilizing anti-interference circuit, no gear jumping or out-of-control knobs during bumpy off-road driving and voltage fluctuation;
6.Fully matched original vehicle wiring protocol, plug and play without professional diagnostic equipment coding.
It is used to replace faulty panels with stuck knobs, no air output, invalid cold/hot adjustment, broken defrost function and poor contact caused by oxidized internal copper springs. All 8 OEM numbers can be cross-replaced, cannot be matched with Dodge Ram pickup window switches or Chrysler sedan climate panel LD-27006

 

Applicable Models

Brand Model Production Year
Jeep Cherokee XJ / Wrangler TJ 1997–2006

 

Parameter

English Item English Spec Details
Product Model LD-27007
Full Product Name Dashboard A/C Heater Climate Control Panel Assembly For Jeep Vehicles
OEM Interchange Part Numbers 55055459AA、55055459AB、55055459AF、55055459AC、55055459AD、55055459AE、223292、314-399-5945
Operating Voltage DC 12V Standard Automotive Voltage
Main Raw Materials Matte black high-strength ABS plastic housing, wear-resistant rotary knobs, silver-plated internal contact copper sheets, fully sealed anti-dust circuit board
Installation Method Direct OE plug & play, fits original dashboard mounting slot, plastic clip fixed design, no wire cutting or ECU programming required
Environmental Resistance Resist high temperature dashboard sunlight exposure, dust and slight humidity, adapt off-road dusty working conditions
Factory Warranty 12 Months Factory Quality Warranty
Compatible Brand Jeep (Cherokee XJ / Wrangler TJ series)
Appearance Features 1. Narrow strip black ABS housing, 3 rotary knob layout2. Left knob: fan speed adjustment; middle knob: cold & hot temperature control with red/blue marking; right knob: air outlet mode switching3. Side integrated plastic snap buckles for clip mounting to dashboard trim4. Rear dedicated multi-pin vehicle wiring plug with anti-reverse lock design5. 1:1 OEM mold duplication, fully interchangeable with all listed OEM part numbers
Core Integrated Functions 1. Multi-speed fan blower control2. Cold/hot air temperature adjustment3. Air outlet mode switching (defrost, face, foot, mixed mode)4. A/C compressor switch control5. Anti-interference circuit chip, stable climate control signal under off-road bumpy driving6. Full matching with original vehicle HVAC circuit protocol, plug and play without dealer coding

Product Details

Packaging and delivery

Item Value
Selling Units Single item
Single package size
Single gross weight

 

Product Specifications and Trade Terms

Item Specification/Details
Warranty Period 12 months or 100,000 km (whichever comes first)
Payment Terms T/T, PayPal, Western Union
Port of Loading Ningbo Port or Shanghai Port
Lead Time 7-15 working days after deposit
Packing 50 pcs per carton with foam
Shipping Method By sea / air / express (DHL/FedEx/UPS)
Sample Policy Free samples, buyer pays freight
After-Sales Support Itemcement for defective items
Certification ISO/TS 16949:2009

 

Supplementary Note

 

1.Model Distinction: LD-27007 is clip-type climate control panel exclusive for Jeep Cherokee XJ & Wrangler TJ, compatible with OEM 55055459AA/AB/AF/AC/AD/AE, 223292, 314-399-5945. Housing width, clip structure and pin definition are completely incompatible with Chrysler LD-27006 climate panel, also not interchangeable with all Dodge Ram pickup window lift switches;

2.Pre-shipment QC: Every finished unit passes 5 complete factory inspections: 50,000 times knob rotation durability test, high-temperature sunlight aging test, dust spray test, wiring continuity test, HVAC circuit matching test, suitable for dusty harsh working conditions of Jeep off-road and construction site;

3.Supply Advantage: Permanent stock all year round, support sample trial orders and full-set bulk wholesale of all Jeep climate control panels, suitable for Amazon, independent websites and offline North American off-road auto parts distributors;

4.Installation Tips: Pry open Jeep center dashboard upper trim panel with plastic pry tool, press inward the buckles on both sides of original panel to take it out, unplug rear wiring connector, align this product with slot and press to clip tight, plug back original harness and reinstall center trim for full non-destructive installation.